Garden pond building is a building that adds beauty, elegance, and creates a livelier garden appearance. This is what makes many homeowners love the addition of a garden pond building in their yard!
Whether it’s a fish pond, mini waterfall, or a simple water reservoir. The water pool will become a focal point for enhancing the appearance of your lawn. However, to get it is not as easy as you think! In order to make it easier there are some basic guidelines for building a garden pond building that you must know, here are some tips that can be tried.
Garden Pond Building
Flatten the garden pool perimeters
To start a garden pond building project, when you start digging the pond hole, make sure to have the water level as high as the lowest point around the pond. Make sure all the edges of the garden pool are as close as possible and of the same height!
This may sound trivial, right? However, when starting to dig the pool this is often forgotten. Maybe the right level can’t be reached perfectly, try to think about its relation to the storage and also tolerance.
When the pool is 24 inches high, then the circumference of the existing height should be kept to a minimum (1-2 Inches is sufficient).
Check the depth of the pool
Consider the depth of the existing pond, will it create a shallow or deeper pool? The depth of the garden pond building is an important point that will affect your expenses. A deeper pool will hide into it and allow the fish to hide. And this pool also requires an additional pond liner which can be costly!
A shallow pond is better for additional decorative rocks and will allow the fish to stand out more. Unfortunately, shallow ponds will also accumulate a lot of algae because the light hits the water with great intensity.
Protect the pond bottom!
Moles and moles are insects that can dig holes in your yard. When they might be in the yard, they will probably often create holes that are distracting from the view. However, the main problem was when they dug the exit hole under the pond and destroyed the pond liner.
To solve this, you can place a metal mesh or hardware cloth at the bottom of your pool before removing the dirt on it.
Reconcile pool size and layers
Basically, a garden pool will only be the size of the layer of the underlying pond! A liner in a pond made of EPDM is a very expensive option, but the PVC option is a better idea than EPDM.
When a material project is underway try to include stones, slabs of concrete, blocks of retaining walls, and a few low-cost items that can be an alternative for you.
Garden pond building by keeping the basic shape
When you are building a pond for the first time in your garden, it might make the holes and grooves something interesting for the pond. However, basically, the initial softer nuances soften and disappear with the hold of later builds! Giving an undercoat, additional layers, additional pond rock, and edge rock will all contribute to this softening process. So, keep thinking about the existing basic formation!
Avoid walls that are too high and vertical
When you have pool walls that are getting more vertical and taller in your garden, the more difficult it will be to work with when applying stones to your pool. Natural stone may be difficult to stack vertically.
It is not only the stones that fall easily but also a large amount of rock that is needed to cover your area. Small stones can be cheap but difficult to stack! By using large rocks, you will find it easier to cover the vertical area but it costs a lot of money and it is difficult to move them.
We recommend that you keep the edge of the pool at an angle of 45 degrees or less so that the rocks can perform at their best in the pool.
Use filters and external skimmers
when you use a permanent water filter that is attached to the pool wall, what you can do is use manual skimming or floating filters. Hand skimming is a regular job, and the floating filter will get a water level and be unpleasant to look at.
Garden pond building with Covering the Pond Liner
Every square inch in the lining of the pond must be properly covered! This also applies to the most expensive and best pond liners you can get. To protect it from damage is to make all liners covered with something permanent such as rocks, river pebbles, or fine gravel at the bottom. However, doing it in the back can overload the pool liner!
The source of the stone in the garden pond building
Basically, garden ponds need more rock on the bottom and sides to cover the liner. And when you buy all the stones, the cost can increase very rapidly! A better thing to do is to get a stone that you can use whenever you are out. A river or beach becomes a place with rock sources for gravel, round stones, sandstone, and so on.
Cleaning the garden pond building
The scariest thing about owning a pool is when a cleaning project comes along! a garden pond becomes a place that will collect a lot of dust, dirt, leaves, and much more. When there is too much dirt in the pool, the most sensible way to clean is to empty the pool.
An effective tip in your cleaning project is to use a pond that is smooth and easy to clean.