Make garden stepping stones can be a decorative addition that increases the attractiveness of the garden, as well as the look of the garden, and doesn’t even cost a lot of extras! However, make a stepping stone does not always use natural stone. Concrete that is poured into a mold is a better idea for this project.
Our pavers can be an easier, less time-consuming idea too! And some people also use chopped wood to make it. Although wood is not a suitable item to replace your stepping stone. So, for more inspiration in this Make garden stepping stones project just keep on scrolling!
Why Make garden stepping stones?
You may still hesitate to start this project, but when deciding to Make garden stepping stones there are many advantages that will be obtained such as:
- Stepping stones are an easy choice to make and enhance the appearance of a garden. By mixing the concrete, you can get an attractive stepping stone appearance that is suitable for the garden.
- When this project is done together with children, it can be a way to practice their creativity
- Whatever your choice is either natural stone or cast stone, building projects can be carried out with ease, and even maintenance
- Make garden stepping stones can be a convenient therapeutic method to practice every evening or morning.
The benefits of Make garden stepping stones?
In addition to enhancing the aesthetic appearance of the garden, making stepping stones will provide many benefits for you and your home, such as:
- Stepping stone can be an item that holds various impurities that will enter the house.
- Overcoming humidity in garden mulch
- Filter dirt and dust in traffic areas and makes grass safer from existing compaction.
- A stepping stone made of concrete becomes an item that can attract the arrival of butterflies, the concrete material will absorb the warmth of the sun and make cold-blooded butterflies stop by and warm its body on your concrete surface.
- Fencing wire
- Concrete (pre-mixed)
- And concrete dye
Get started Make garden stepping stones!
- Get prints available at craft stores
- Brush the inside of your mold with Vaseline to make it easier to separate the stepping stone from your garden
- Mix the concrete with a little water (make sure your mixture is damp on each side), making sure the consistency isn’t too dry or too thick! Consistency testing can be done by using a shovel blade and cutting a shallow channel from the surface. Make sure the damp concrete isn’t too dry or wet for the most out of your project.
- Pour the mixed concrete into the wheelbarrow
- When the mixture you create is appropriate, you can start pouring it into stepping stone molds in the garden.
- After letting it sit for 50 minutes, you can try to give the stone a decorative addition by using marbles or other items.
- Let them sit for 3-4 days to get completely dry before transferring them to the garden! This will anticipate cracks that may occur as displacement takes place.
- When you want to get it out, try turning the mold upside down and tapping lightly around the rock.
- After placing them in the garden, leave them there for about 5-7 days before you can step on them!
In this installation project, you must determine the exact distance from one stone to another. This aims to get a comfortable appearance and accommodate the steps of each visitor later. The most likely distance is 24 inches (for most people).
To make this project easier, you can start by placing stepping stones on a quarter of the path you have defined. Then see if you can walk comfortably there?
Once you find the most comfortable and most appropriate place to place the rock, mark it by inserting a knife or shovel! For stones that are 2 inches deep, you need to flow them 2 inches deep, and so on.
Under the loops, you can add a layer of sand at least 1/2 inch! Sand will serve as a good drainage provider and they are easier to work with than ground as a base! A 1/2-inch layer of sand can push concrete stepping stones up 1/2 inch too! This height is quite an idea.
Make garden stepping stones by design
What should not be missed is how the design will be used, is it informal or formal? The informal style design is to Make garden stepping stones by digging into the area where the rock will be placed. Meanwhile, formal will use all the existing paths there!