Tile Floor Maintenance is Really Effective to do

Tile Floor Maintenance is Really Effective to do

Tile Floor Maintenance

You need to know that tile floors can last for decades, even for life if you care for them properly! The good news is that tile floors are easier to maintain than other floors. All you need to keep the floor looking clean and shiny is to use warm water, a little soap, and the right cleaning products. Tile floor maintenance can be a pretty fun job, get the best trick for cleaning ceramic floors in the following way.

Tile Floor Maintenance is Really Effective to do

Tile Floor Maintenance is Really Effective to do
Tile Floor Maintenance is Really Effective to do

How routine can a Tile floor maintenance project be carried out?
Floor tiles should be cleaned by washing and drying them, or you can sweep, vacuum, and wipe away dirt at least once every 2 weeks. Cleaning, sweeping, and mopping will keep your floors looking while cleaning the grout once every 2 months will make the floor last longer than you think.

Requirements in Tile floor maintenance

  • Broom
  • Mop
  • Dry Cloth
  • Bucket
  • Warm water
  • And cleaning products

Floor cleaning tricks
Tile, ceramic, and porcelain floors are easy-to-maintained (routine) flooring materials, when you find a floor with a pile of dirt the floor cleaning project can be quite tiring. However, you can use almost any cleaning product to make it look more flawless. Options like laundry soap or vinegar are options that won’t scratch floors and keep them shiny.

Have Wood Floor? Know About Maintance here.

Effective floor maintenance trick to try (Ceramic and porcelain)

  • Sweep up the dirt
    The first thing to do in keeping the appearance of a tile floor is to vacuum and clean any dirt that is in the corners or on every inch of your surface. Use a microfiber cloth to make cleaning your surface easier.
  • Use cleaning products and warm water
    A mop or chamois cloth is a good choice to use as a floor cleaning material, dip it in the cleaning product solution that has been prepared then wring it out until you get a damp cloth.
  • Mop evenly
    Use a regular pattern to mop your room, and make sure not an inch is missed.
  • Change the water regularly
    When cleaning floor tiles by mopping, you must also rinse them so that the appearance is maintained. Using a dry cloth to clean the floor will make the water cloudy. Requires you to throw it away and replace it with clean water to minimize the dirty layer on your floor surface. If any dirt is stuck, you can mix white vinegar with hot water to get rid of it!
  • Grout
    Use a grout cleaner to keep the grout looking clean and leave it on for 10-15 minutes then rinse.
  • Dry it
    Tiles can leave water spots on the surface, to minimize this use a clean cloth after mopping the floor.

Tile floor maintenance of marble and natural stone
Marble, slate, or granite tile floors can be treated in much the same way as porcelain or ceramic tiles. However, there are some things that should be underlined when treating marble or stone floors:

  • Use a broom with soft bristles when sweeping it, as this is a material that scratches more easily than ceramic and porcelain.
  • Use a suitable cleaner, white vinegar is a very effective cleaner for porcelain or ceramic tiles. However, it won’t work for marble and natural stone. Granite tiles require a cleaner with a neutral pH to minimize discoloration on the surface.

Tile floor maintenance (vinyl and Linoleum)
Linoleum and vinyl flooring are an affordable option for stone and ceramic tiles. However, care must be taken with care. Using a steam mop is very tempting, but this floor will not survive the bath produced by a steam mop. Treatments that can be tried:

  • Vinyl: After you’re done sweeping, you can wipe it down with a cleaning product recommended by the provider or use white vinegar. Avoid using cleaners with abrasive properties as they can scratch the floor.
  • Linoleum: After sweeping, use a special cleaning solution for linoleum floors (often a mixture of water and borax). Use wax and buffs every 6 months to keep the floor shiny.

How to get rid of grout stains?
Bright colored grout? This is the part that is very easy to stain (change appearance). Sometimes cleaning grout isn’t just about using the cleaning products you normally use. Try mixing baking soda with water for a secret cleanser on your grout. Apply it on the stain and let it sit 30 minutes – 1 hour then scrub with a nylon brush or toothbrush.

To avoid damaging the floor, you can use a baking soda paste and silicone sealer to protect your grout. Scheduled and regular tile floor maintenance is the best way to keep your floors looking, so make sure to schedule your thorough cleaning project.

Leave a Reply

Your email address will not be published.